The clutch and steering are the two mechanical devices that the driver steers. One, however, is used to damaging faster than the other: it is the clutch device of course. In particular with the gearbox, in close connection. It happens quite frequently that gearshift concerns arise on the + str (XXX) +. And even if the clutch is frequently involved, it sometimes happens that we are surprised at the source of the concerns. In addition, it avoids from time to time to change the whole kit. Here are consequently the gearshift concerns the most regular.
+ str (XXX) +: Impossible to pass one of the speeds
It happens from time to time that one of the gears does not pass any more. Or just even or odd speeds. In this situation, the clutch is worn. But it is not necessarily related to the entire clutch kit or gearbox of your + str (XXX) +. It happens that the worry comes from a link or a rubber that holds it. The problem can still arise from the gearbox. You can remove it to check that no external component is blocking it. If the latter is defective, it must be replaced.
Unable to shift gear once the + str (XXX) + engine is running
Unfortunately, this is a fairly common concern. Since the engine block is off it is possible to shift your gears, that means that the gearbox of the + str (XXX) + is operational. Once the engine block is on, it is impossible. The problem stems from the clutch. Usually it will be advisable to change the entire clutch kit. You can always drop it off and check the condition of each part. For information, it is advisable to change the clutch every 150 km.
+ str (XXX) +: no speed passes
If none of the gears pass, the engine stopped or in working order, it's really annoying. One thing to check is the wear and tear on the gearbox of your + str (XXX) +. There is a good chance that it will be HS. In order to understand where the concern comes from, it's relatively simple. If you can put the lever in the guide of one of the speeds, but that the speed does not engage, it is the clutch which holds certainly a concern. If the lever seems blocked and you cannot push it, the problem probably comes from the gearbox. For both, it will most certainly change one or more rooms.