The timing belt is one of the most essential elements of an automobile. That said, in the event that we do not pay attention, the rupture of a belt can induce very serious engine malfunctions. Everyone knows that it is necessary to replace the timing belt, on this Suzuki Jimny but also on any style of automobile. So, if you want to correctly understand the issues, we will go around the question on the timing belt: What is it for, what for to replace it, when to replace it, and finally what to do for the replace. You will find below therefore our small specific folder timing belt!change-belt-timing-Suzuki-Jimny

What is the purpose of a timing belt on a Suzuki Jimny?

So, if you want to know the function of the belt of any Suzuki Jimny, you will have to understand what a distribution. In fact, distribution is the entire mechanical parts that governs the admission phase (the valves) of the air-fuel mixture, But also exhaust. This timing belt is a toothed belt, prompted through crankshaft pinion, which subsequently incites the pulley camshaft. Depending on the car model, it can at the same time drive the pulley of the injection pump as well as the pulley of the water pump on most of the systems. Basically, it is the timing belt that will allow to turn the pistons and other parts of the engine block so synchronized.

Why change the timing belt on a Suzuki Jimny?

Thanks to its consistency in caoutchouc, the distribution belt wears out over time. If you drive badly, the belt will become much less malleable and less resistant. This phenomenon is more and more important if you drive in urban areas, with frequent starts. If, on the other hand, you drive little, the belt may become deform if it stays in the same position all the time. If this belt loosens or comes off, it triggers a engine stop instantaneous. Also, due to the voltage, it can damage various parts of the engine. It is therefore important to be careful. We will now look at when it needs to be replaced.

When to change the timing belt on a Suzuki Jimny?

The disadvantage with the belt is that it has no wear indicator. It is therefore complicated to assess its wear, especially since it is hardly accessible in the engine. The best way to avoid breakage of the engine block is to follow the manufacturer's instructions. However, it is sometimes wiser to trust the mechanics. It is regularly advised to replace them every 100 000 kilometers, or all 5 years. Certain situations, such as coolant or oil leaks, will damage the belt prematurely.

How to change the timing belt on a Suzuki Jimny?

Changing the timing belt on your Suzuki Jimny is not easy. Certainly, it is a fundamental part of the engine block, so when it is not done properly, it will inevitably create major damage to the engine. This repair is therefore not recommended without the presence of a mechanic. In order to replace the timing belt, you will first have to buy the distribution kit whole. Here are the steps to follow in order to change your belt:

  • Make sure to loosen the tensioner roller to loosen the belt.
  • Remove the timing belt.
  • Disassemble all the roller rollers and the water pump.
  • Install the new water pump
  • Put the rollers in their respective locations
  • Put the timing belt in place following the marks
  • Tension the belt following the recommended tension using a blood pressure monitor
  • Rotate the engine block manually, which corresponds to 4 city turns

Conclusion

It therefore remains essential to master certain points before engaging in repairs. The belt is a essential element of the engine block, it is this which will allow certain parts to be synchronized. Its inevitable deterioration makes it necessary to replace it quite frequently. If it is delayed too long, it may damage the engine block irreversibly. Finally, it remains essential to have good mechanical skills before engaging in this kind of work. Voila, the key is in your pocket. Good road !