The timing belt is one of most essential elements of an automobile. However, in the event that you do not necessarily pay attention, the breakage of a belt can damage very serious engine malfunctions. Everyone has already heard that it is necessary to change the timing belt, on a Toyota Hilux 3 or on any model of car. To properly understand the issues, we will take a look at the question concerning the timing belt: What is it for, why to change it, when to change it, and finally how to change it. You will therefore find a complete file specific to the timing belt below!
What is the purpose of a timing belt on a Toyota Hilux 3?
To discover the action of the belt of this Toyota Hilux 3, you will have to understand what the famous distribution. In fact, distribution is the set of mechanical components that governs the admission phase (the valves) of the air-fuel mixture, But also exhaust. The timing belt is a toothed belt, prompted by crankshaft pinion, which in turn drives the pulley camshaft. Depending on the type of automobile, the latter may at the same time call the pulley of the injection pump but also the pulley of the water pump on most of the systems. Basically, it is the timing belt that gives the possibility to turn the pistons and various parts of the engine block so synchronized.
Why change the timing belt on a Toyota Hilux 3?
Because of its material in caoutchouc, the distribution belt will wear out over time. If you drive a lot, the walking belt becomes less flexible and much less enduring. This phenomenon is increasingly higher if you drive in urban areas, with frequent starts. If, on the contrary, you do not drive much, the belt may deform while remaining in a stable position at all times. If ever a strap comes loose or comes off, it causes a engine stop instantaneous. In addition, with the contraction, it can damage some parts of the engine. It is therefore essential to be careful. We will now see when it will have to be changed.
When to change the timing belt on a Toyota Hilux 3?
The problem with the belt is that it does not have a wear indicator. So it's complicated to see her condition, especially since she is difficult to access within the engine. The easiest way to avoid engine block breakage turns out to be to read the manufacturer's information. However, sometimes it is essential to trust the mechanics. It is frequently recommended to change them every 100 000 km, or even every 5 years. Certain situations, such as coolant or oil leaks, can damage the belt more quickly.
How to change the timing belt on a Toyota Hilux 3?
Replacing the timing belt on a Toyota Hilux 3 is not easy. Certainly, this is a vital part of the engine block, so when not done correctly, it will necessarily cause very serious damage to the engine block. Such a repair is therefore not recommended without the company of a garage owner. In order to change the timing belt, you must first buy the distribution kit full. Here are therefore the steps to follow in order to replace the famous belt:
- Make sure to loosen the tensioner roller to loosen the belt.
- Release the timing belt.
- Remove all the rollers and the water pump.
- Secure the new water pump in place
- Return the rollers to their respective locations
- Add the timing belt in place, respecting the marks
- Tighten the belt while respecting the recommended tension thanks to a tensiometer
- Operate the engine block manually, which corresponds to 4 city tours
Conclusion
It is therefore essential to know certain points before embarking on any work. The belt is a fundamental engine component, it is the latter which will allow to synchronize various parts. Its natural degradation makes it necessary to change it very frequently. If you really let this delay, it can irrevocably damage the engine. And finally, it seems essential to have very good mechanical skills to embark on these repairs. That's it, the key is now in your pocket. Good road !